10 in stock

+
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Categories:
Tags:
2255648RE556
SKU:
R22556AC

Low Reverse Band Drum

Replacement Housing Low Sprag Inner Race

Fits 1994 Up Dodge & Jeep Trucks

A-518 / A518 / 46RH / 46-RH / 46RE / 46-RE / A618 / A-618 / 47RH / 47RE

Very Often Needed During Rebuild

Close to a 30% fail rate on these in cores dis-assembled.
Rear Most Drum Inside Main Case.

Other Names & Terms For This Item:
Rear Band Drum
Low Band Drum
Low Sprag Inner Race
Low / Reverse Housing
Other Details About This Product
Anytime there is a lack or loss of lubrication this drum , and it’s support wipe each other out.
This have 6 1/4″ Diameter at the band surface , and an overall outside diameter of 6 5/8″ at the lip.
This drum also acts as the Low Sprag Inner Race as the race is pressed onto the drum.
This inner sprag race is only available with this drum , and not available separately.
 
If You Also Need The Aluminum Support For This Drum
See Our Part # R22634B
This may fit 1993 and older models , but must have 14 Lobe Low Sprag Race present in the case.

 

  • 6.25″ OD w/ 6.625″ SHOULDER
  • PRESS ON SPRAG RACE

All parts that start with the letter U are used. They are professionally cleaned and inspected. Generally, they will be coated with a protective layer to prevent corrosion. It is recommended that any used part be completely disassembled, re-inspected, lubricated, as necessary, prior to installation. The orientation of all parts that come assembled must be verified by the installing technician. EFTP will not assume liability for any part that has been mis-installed. We do guarantee the part to be in good condition and suitable for use. Any used soft parts (seals, bushings, washers clutch plates, O-rings, etc.) should be inspected before use. It is recommended that all soft parts be replaced at the time of installation. We do not guarantee the condition of soft parts and will not replace worn or damaged soft parts that may be included or installed on a used part. We offer free 30 day returns on parts that have not been installed and offer a 1-year warranty on the part itself. We will not be liable for any subsequent damage that may result should the part malfunction.

Weight 7 lbs
Dimensions 7 × 7 × 4 in

You May Also Like

Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist